CAM pro-rata share: how to calculate and check it
Your pro-rata share is the percentage of the center's CAM pool you pay. The formula is one line: your square feet divided by the denominator your lease defines. The arithmetic is rarely the problem. The problem is the denominator, because it decides how the same pool is allocated across tenants, and the statement may not show it. Your lease controls, so check the definition before you check the math.
The formula
Tenant's share = premises square feet / denominator square feet
Tenant's bill = allowed CAM pool x tenant's share
If the words "true-up" and "pool" are new, what a CAM reconciliation is covers those first. If the pool itself is in question, what is included in CAM charges covers the lines inside it. This page covers only the percentage applied to it.
Five kinds of share clause
Look in the definitions for "Tenant's Share", "Proportionate Share" or "Pro Rata Share", and read any amendment that changes it.
| What the lease says | What to check |
|---|---|
| A fixed percent ("Tenant's Share is 2.50%") | The billed percent matches, and whether the lease allows it to be adjusted at all. |
| Premises over total leasable area of the center, whether or not leased | The denominator stays the same when suites go vacant. Vacant space stays in the math. |
| Premises over leased or occupied area | The denominator moves with vacancy, so your share can rise in a year with more empty suites. Check for a floor, such as a minimum percent of the center treated as occupied. |
| Total area excluding named anchors or outparcels | The excluded space is space the lease actually names, and whether payments from that space are credited to the pool. |
| Different shares for different pools | A lease can use one share for common areas and another for items such as insurance or a roof. Each line on the statement uses the right share for its pool. |
These are clause types a lease may contain, not a statement of how common each one is.
Worked example: one bill, four denominators
A hypothetical tenant leases 3,000 SF in a center with 120,000 SF of leasable area. That includes a 40,000 SF grocery anchor and 8,000 SF of vacant suites. The allowed CAM pool for the year is $480,000, and the anchor paid the landlord a $60,000 contribution toward it. The lease defines the denominator as the center's total leasable area, whether or not leased. All figures are illustrative.
| How the landlord allocated | Pool | Denominator | Share | Tenant's bill | Over the lease |
|---|---|---|---|---|---|
| A. Total leasable area, as the lease says | $480,000 | 120,000 SF | 2.500% | $12,000.00 | $0.00 |
| B. Vacant suites left out | $480,000 | 112,000 SF | 2.679% | $12,857.14 | $857.14 |
| C. Anchor left out | $480,000 | 80,000 SF | 3.750% | $18,000.00 | $6,000.00 |
| D. Anchor left out, its contribution credited | $420,000 | 80,000 SF | 3.750% | $15,750.00 | $3,750.00 |
The arithmetic: A is $480,000 x 3,000 / 120,000 = $12,000. B is $480,000 x 3,000 / 112,000 = $12,857.14, which is 7.14% more than A, the same as 120,000 / 112,000 - 1. C is $480,000 x 3,000 / 80,000 = $18,000. D is ($480,000 - $60,000) x 3,000 / 80,000 = $15,750.
Only A follows this lease. Under a lease that did exclude the anchor and credit its contribution, D would be the correct bill and A would not, which is why the clause comes first. Note also that in B the percent is rounded for display: compute from the square feet, because $480,000 x 2.679% gives $12,859.20, a few dollars off. The CAM overcharge benchmarks give the general rule for how much a smaller denominator raises a share.
How to get a transparent allocation
A statement that shows only a percent does not let you test it. Ask the landlord in writing for:
- The numerator and denominator used for your share, in square feet, for each pool.
- A site plan or area schedule showing which buildings and suites are in the denominator.
- Any change in the denominator from last year, and the reason for it.
- Contributions received from anchors, outparcels or other parties that do not share in the pool, and whether they were credited.
- The measurement behind your premises figure, if the square feet differ from the lease.
What you are entitled to receive depends on your lease's statement and audit clauses, so cite them in the request.
How to check your share
- Copy the share definition and every amendment that touches it. Note the premises area stated in the lease.
- Compare this year's share with last year's. A change with no change in your premises needs an explanation.
- Recompute the share from square feet using the lease's denominator, separately for each pool.
- Multiply the difference by the pool, then continue with the cap, fee and exclusion checks in the step-by-step audit method.
- Object in writing before your audit window closes. The dispute guide has a letter template.
Questions
Do vacant suites count in the pro-rata share denominator?
It depends on the wording. If the denominator is total leasable area, whether or not leased, vacant space stays in and the landlord carries that portion. If it is leased or occupied area, vacant space comes out and your share rises. Your lease controls.
Can my pro-rata share change from year to year?
A fixed percent stays put unless the lease allows otherwise. A share built on square feet can move when the denominator changes, for example when a building is added or removed, if the lease's definition allows it. Ask for the reason behind any change.
What is the difference between a smaller denominator and a gross-up?
A smaller denominator raises your percent. A gross-up leaves your percent alone and raises the variable costs in the pool to what they would be at a stated occupancy. They are separate lease clauses, so check them separately.
Check your own reconciliation, free
Email your lease and the landlord's latest CAM reconciliation to audit@tenantback.com. Tenantback's agents check every line against the lease and send back each overcharge with the clause and the math, usually within minutes. No signup. If you then recover money through Tenantback, it keeps 25% of what comes back, and nothing otherwise.
Using ChatGPT or Claude? Connect https://tenantback.com/mcp and ask it to audit your statement.